EJ Series Metering Pump
The EJ Series provide precise chemical injection at an economical price. Universal voltage capability enables operation from 100 – 240VAC in virtually all countries. The EJ Series are compact, simple to operate and have outputs to 3.2 GPH (12.0 LPH) and a maximum pressure of 175 PSI (1.2 MPa).
CAPACITY/PRESSURE RATING
- Specifications based on water at rated voltage and ambient temperature.
- Flow rates were collected at the maximum discharge pressure and 360spm. Degassing option derates capacity by approximately 20%. *B09 size is available in PVC liquid ends only
- Flow rate increases as discharge pressure decreases.
- Allowable ambient temperature: 0 to 104°F (0 to 40°C)
- Allowable liquid temperature: 0 to 104°F (0 to 40°C)
- Allowable power voltage deviation: ±10% of the rated voltage
- Noise level: 65dB at 10 ft. (A scale)
- E90495 (field-wireable connector) or IX0018 (connector with 5m cable) required for Inputs. (not-included)
- All pumps include a manual air vent valve except FC/SHN models.
- All pumps include one foot valve, injection valve, 20 ft. of PE tubing and ceramic weight except for SHN models.
LIQUID END MATERIALS
