PosiFlow Feed Verification Sensor




PosiFlowFeed verification has never been better!  The PosiFlow┬« Sensor will verify that your metering pump is truly moving liquid into the system and has not lost prime.

  • Provides accurate and non-intrusive flow verification.

  • No moving parts in the sensor eliminates any concern of plugging, leaking or jamming of the flow path or sensing mechanism.

  • Sends out a signal with every stroke as long as there is liquid pumping against pressure.

  • EW-Y Series pumps take the PosiFlow signal directly, monitoring the feedback against pump operation.

  • Install PosiFlow┬« on the discharge side of the metering pump, and connect to the digital input option card of the WebMaster.
    • Supplies a contact closure to the WebMaster every time the metering pump pulses and the sensor detects fluid movement.
    • Controller will send an alarm if the pump should be operating but no flow pulses are received.
    • Controller can also use a programmable volume-per-stroke value to totalize the volume of chemical feed.
FCP-1VC PosiFlow Sensor, VC
FCP-1VE PosiFlow Sensor, VE
FCP-1PC PosiFlow Sensor, PC
FCP-1PE PosiFlow Sensor, PE



This document requires Adobe Reader Accessories Brochure
This document requires Adobe Reader Instructions
This document requires Adobe Reader FAQs, Installation & Wiring
This document requires Adobe Reader Troubleshooting